Journey AWD V6-3.5L (2009)
2. Using a brake pedal holding tool as shown, depress brake pedal past its first inch of travel and hold it in this position. Holding pedal in this
position will isolate master cylinder from hydraulic brake system and will not allow brake fluid to drain out of brake fluid reservoir while brake
lines are open.
3. Raise and support vehicle. See: Maintenance
4. Remove wheel mounting nuts (3), then tire and wheel assembly (1).
5. Manually release the parking brake cable tension. See: Parking Brake System/Service and Repair
6. Collapse the cable retainer fingers (2) at the end of the cable housing (3), then pull the cable housing out of the mounting bracket (1).