dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Hydraulic Control unit (HCU) - Description|Page 5337 > < Hydraulic Control unit (HCU) - Description|Page 5335
Page 2
background image

On Right-Hand-Drive vehicles, the ICU (1) is located in the engine compartment, mounted to the left side body frame rail and strut tower.

The ABS with ESP(R) and All-Speed Traction Control ICU consists of the following components: the ABM, 8 (build/decay) solenoid valves, two
traction control solenoid valves, two electronic shuttle valves, valve block, fluid accumulators, a pump, and an electric pump/motor.

NOTE: The HCU and the ABM are not serviceable separately from the ICU for vehicles equipped with Hill Start Assist (HSA).

The replaceable components of the ICU are the HCU and the ABM. No attempt should be made to service any components of the HCU or ABM. The
ABM can be serviced without removing the entire assembly from the vehicle.

For additional information on the ABM, See: Antilock Brakes / Traction Control Systems/Electronic Brake Control Module/Description and
Operation/Anti-Lock Brake System Module - Description. For additional information on the HCU, See: Hydraulic Control unit (HCU) - Description  -
DESCRIPTION).

Hydraulic Control unit (HCU) - Description|Page 5337 > < Hydraulic Control unit (HCU) - Description|Page 5335