Journey AWD V6-3.5L (2009)
CAUTION: Before installing the ABM harness connector on the ABM, be sure the seal is properly installed in the connector.
3. Insert the ABM wiring harness connector (2) into the socket of the ABM (1) and close the cover, locking the connector in place.
CAUTION: The brake tubes must be routed to the correct ports. Improper routing can lead to degraded or undesirable system performance
including external brake fluid leaks.
-
(1) Master Cylinder Secondary
-
(2) Front Left
-
(3) Front Right
-
(4) Master Cylinder Primary
-
(5) Rear Left
-
(6) Rear Right