Journey AWD V6-3.5L (2009)
Parking Brake Cable: Service and Repair
Removal
Front Cable - With Foot Lever
WITH FOOT LEVER
1. Release the parking brake.
2. Raise and support the vehicle. See: Maintenance
3. Manually release the parking brake cable tension. See: Service and Repair
4. Collapse the front cable retainer fingers at the end of the cable housing where it contacts the intermediate bracket (1). Pull the cable (5) forward
and remove it from the intermediate bracket.
5. Push the front cable strand into the housing until it bottoms.
6. Remove the nuts (5) securing the front cable routing clamps (1) to the underbody of the vehicle.
7. Remove the cable routing clamps (1) from the cable (4).
8. Lower the vehicle.
9. Remove the left front door opening sill scuff plate.
10. Remove the lower cowl trim.
11. Remove the steering column opening cover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Steering Column Opening Cover - Removal.
