Journey AWD V6-3.5L (2009)
3. Apply light coat of clean engine oil to the camshaft oil seal lip (3) and Seal Protector Sleeve 6788 (2).
NOTE: When installing the camshaft (1) into the cylinder head (4), you must first insert Seal Protector Sleeve 6788 (2) through the camshaft
seal (3) until the camshaft seats, then remove Seal Protector Sleeve 6788 (2) from the camshaft.
4. Install the camshaft using Seal Protector Sleeve 6788.
5. Install the left cylinder head See: Cylinder Head Assembly/Service and Repair/Removal and Replacement/Cylinder Head - Installation.
