Journey AWD V6-3.5L (2009)
NOTE: Illustration shown with instrument panel removed for clarity.
1. On RHD models, remove the glove box bin See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Instrument
Panel Glove Box - Removal.
2. On LHD models, disconnect the shift interlock cable (3) from the left floor duct (1) and position the cable out of the way.
3. Remove the screw (4) that secures the left floor duct to the left side of the HVAC housing (2).
4. Disconnect the left floor duct from the HVAC housing and remove the duct.
REAR FLOOR DISTRIBUTION DUCTS
1. Remove the instrument panel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel -
Removal.
2. Remove the rear seat floor ducts (refer to REAR SEAT FLOOR DUCTS).
3. Disconnect the left rear floor distribution duct (1) and the right rear floor distribution duct (2) as required from the HVAC housing (3) and remove
the duct(s).
REAR SEAT FLOOR DUCTS