Journey AWD V6-3.5L (2009)
Solar Sensor: Service and Repair
Infrared Temperature Sensor - Removal
REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Using Trim Stick C-4755 or equivalent, carefully disengage the four retaining tabs (1) that secure the infrared sensor and overhead map/courtesy
lamp bezel (2) to the overhead console (3).
3. Disconnect the wire harness connectors (4) from the two overhead map/courtesy lamps (5) and the infrared sensor (6) and remove the sensor, lamp
and bezel assembly from the vehicle