Journey AWD V6-3.5L (2009)
Ignition Switch: Service and Repair
Wireless Ignition Node Receiver - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the lower instrument panel knee blocker. See: Restraint Systems/Knee Diverter/Service and Repair/Kneeblocker - Removal.
3. Remove upper steering column shroud. See: Steering and Suspension/Steering/Steering Column/Steering Column Cover/Service and
Repair/Steering Column Shroud - Removal.
4. Remove the instrument cluster bezel, reposition the instrument, and remove the upper WIN bracket attaching screw (1). See: Instrument Panel,
Gauges and Warning Indicators/Instrument Cluster / Carrier/Service and Repair/Instrument Cluster - Removal.
5. Disconnect the WIN electrical connector (1) and the antenna connector (3) from the WIN.
6. Utilize a trim stick or equivalent and gently pry WIN trim ring (2) away from the instrument panel.
7. Remove the lower WIN attaching screw (5).
8. Remove the lower WIN bracket attaching screw (4).