Journey AWD V6-3.5L (2009)
Fluid Pressure Sensor/Switch: Service and Repair
Transmission Solenoid and Pressure Switch Assembly - Installation
INSTALLATION
1. Install the solenoid/pressure switch assembly.
2. Install mounting bolts (1) at clamp plate (2) and tighten to 6 Nm (50 in. lbs.).
3. Connect the electrical connectors (1, 2) to the pressure control solenoid and line pressure sensors.
4. Install valve body See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve Body/Service and Repair/Removal and
Replacement/Valve Body - Installation.