Journey AWD V6-3.5L (2009)
1. Move the second row right seat to the fully forward position.
2. Reach under the rear edge of the second row right seat cushion frame just to the right of the lower end of the inboard center seat back hinge
bracket (1) to access the right buckle lower anchor (3) and the center seat belt lower anchor (2).
3. Remove the screw (4) that secures the right buckle lower anchor and the center seat belt lower anchor to the right seat cushion frame.
4. From the front of the second row right seat, disengage the buckle (2) from the elastic loop (3) of the right seat cushion trim cover and pull the
buckle lower anchor out from between the right seat cushion and back trim covers.
Third Row
THIRD ROW
WARNING: To avoid serious or fatal injury during and following any seat belt or child restraint anchor service, carefully inspect all seat belts,
buckles, mounting hardware, retractors, tether straps, and anchors for proper installation, operation, or damage. Replace any belt
that is cut, frayed, or torn. Straighten any belt that is twisted. Tighten any loose fasteners. Replace any belt that has a damaged or
ineffective buckle or retractor. Replace any belt that has a bent or damaged latch plate or anchor plate. Replace any child
restraint anchor or the unit to which the anchor is integral that has been bent or damaged. Never attempt to repair a seat belt or
child restraint component. Always replace damaged or ineffective seat belt and child restraint components with the correct, new
and unused replacement parts listed in the Chrysler Mopar (R) Parts Catalog. Failure to follow these instructions may result in
possible serious or fatal injury.
