Journey AWD V6-3.5L (2009)
6. Remove the screw (1) fastening the wheel speed sensor routing clamp (2) to the rear suspension crossmember (3).
7. Remove the screw (2) securing the wheel speed sensor routing clamp (1) to the trailing link.
8. Disconnect the vehicle wiring harness (3) from the wheel speed sensor connector (2) on the body (1).
9. Disengage the wheel speed sensor connector from the routing clip fastened to the body using a screwdriver. Pull the connector forward off the
routing clip. Or, if a NEW routing clip is available, remove the routing clip from the body with the connector attached.
10. Remove the wheel speed sensor from the vehicle.