Journey AWD V6-3.5L (2009)
Stabilizer Link: Service and Repair
Front Stabilizer Bar Link - Installation
INSTALLATION
1. Attach the stabilizer bar link (1) to the stabilizer bar (2). Install and tighten the nut (3) while holding the stabilizer bar link lower stud stationary.
Tighten the nut to 48 Nm (35 ft. lbs.).
2. Attach the stabilizer bar link (1) to the strut (3). Install and tighten the nut (4) while holding the stabilizer bar link stud stationary. Tighten the nut
to 48 Nm (35 ft. lbs.).
