Journey AWD V6-3.5L (2009)
6. Remove the wheel mounting nuts (3), then the tire and wheel assembly (1).
NOTE: If both strut assemblies are to be removed, mark the strut assemblies right or left and keep the parts separated to avoid mix-up. Not
all parts of the strut assembly are interchangeable side-to-side.
7. Remove the screw (1) securing the flex hose (2) routing bracket to the strut (6).
8. While holding the stabilizer bar link (1) stud stationary, remove the nut (4) securing the link to the strut (3).
CAUTION: The strut assembly-to-knuckle attaching bolts (5) are serrated and must not be turned during removal. Hold the bolts stationary in
the knuckle while removing the nuts, then tap the bolts out using a pin punch.
