Journey AWD V6-3.5L (2009)
and tighten wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
6. Lower the vehicle.
7. Install the cowl screen. Install the push-pins (1) securing the cowl screen to the wheelhouse brace and cowl. Rotate the screw (2) in the center of
the cowl screen 90° counterclockwise to lock the screen in place.
8. Install the wiper arms. See: Wiper and Washer Systems/Wiper Arm/Service and Repair/Wiper Arm - Installation
9. Install the cowl top screen (3). Install the two push-pins (1) securing the cowl top screen at the ends. Install the remaining push-pins (2).
10. Install the engine appearance cover.
With Third Row Seating
WITH THIRD ROW SEATING
NOTE: Before proceeding, See: Service Precautions/Vehicle Damage Warnings .
1. Access and remove the rear quarter trim panel. See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Luggage
Compartment Trim/Quarter Trim Panel - Removal
2. Move insulation out of the way to access the shock assembly upper mounting nuts.