Journey AWD V6-3.5L (2009)
3. Install the mounting bolt (4) and nut (1) fastening the shock assembly (2) to the lower control arm (3). Do not tighten at this time.
4. Install the tire and wheel assembly (1) See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation.
Install and tighten wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
5. Lower the vehicle.
6. Install the two nuts (1) on the studs (3) securing the shock assembly to the body bracket (2). Tighten the mounting nuts to 55 Nm (41 ft. lbs.).
7. Install the rear quarter trim panel and components removed to access it. See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and
Repair/Luggage Compartment Trim/Quarter Trim Panel - Installation
