Journey AWD V6-3.5L (2009)
6. Install the two nuts (1) on the studs (3) securing the shock assembly to the body bracket (2). Tighten the mounting nuts to 55 Nm (41 ft. lbs.).
7. Remove four nuts, remove load floor.
8. Fold the access panel back into place.
9. Install the load floor.
10. Position the vehicle on an alignment rack/drive-on lift. Raise the lift as necessary to access the shock mounting bolt and nut.
11. Tighten the shock assembly lower mounting bolt nut (1) to 99 Nm (73 ft. lbs.).
