Journey AWD V6-3.5L (2009)
4. Outer CV joint assembly must be installed on interconnecting shaft until cross (2) of outer CV joint assembly (3) is seated against circlip on
interconnecting shaft (1).
5. Distribute 1/2 the amount of grease provided in seal boot service package (DO NOT USE ANY OTHER TYPE OF GREASE) into outer CV joint
assembly housing. Put the remaining amount into the sealing boot (4).
6. Install outer CV joint sealing boot to interconnecting shaft clamp evenly on sealing boot.
7. Clamp sealing boot onto interconnecting shaft (2) using crimper, Crimping Tool C-4975A and the following procedure. Place Crimping Tool
C-4975A (1) over bridge of clamp (3).