Journey AWD V6-3.5L (2009)
Fluid - Transfer Case: Service and Repair
PTU FLUID DRAIN/FILL
1. Raise vehicle on hoist.
2. Remove bolt (1) from lower part of PTU heat shield (2).
3. Using a long prybar remove the retaining clip (1) from the side of the PTU heat shield (2).
NOTE: Position the PTU heat shield aside as necessary
4. Remove PTU drain plug (1). Drain fluid into suitable container.
5. Install drain plug (1) and torque to 35 Nm (26 ft. lbs.).