Journey AWD V6-3.5L (2009)
Wiper Blade: Service and Repair
Wiper Blade - Removal
Front
FRONT
CAUTION: Do not allow the wiper arm to spring back against the glass without the wiper blade in place or the glass may be damaged.
NOTE: The notched end of the wiper element flexor should always be oriented towards the end of the wiper blade that is nearest to the wiper
pivot.
1. Lift the wiper arm (2) to raise the wiper blade and element (6) off of the glass, until the wiper arm hinge is in its over-center position.
2. To remove the blade from the arm, depress the latch release tab (4) on the pivot block (3) under the tip of the arm and slide the blade away from
the tip towards the pivot end of the arm far enough to disengage the pivot block from the hook formation (5) on the end of the arm.
3. Extract the hook formation on the tip of the wiper arm through the opening in the wiper blade superstructure (1) just ahead of the pivot block.
4. Gently lower the tip of the wiper arm onto the glass.
Rear
REAR
1. Lift the rear wiper arm pivot cap (2) upward to allow the rear wiper blade to be raised off of the glass.
NOTE: The rear wiper arm cannot be raised to its over-center hinge position unless the pivot cover is raised first.
2. Lift the rear wiper arm to its over-center hinge position to raise the wiper blade and element off of the liftgate glass.