Journey FWD V6-3.5L (2009)
Valve Guide Seal: Service and Repair
Valve Guide Seals - Installation
INSTALLATION
1. The valve stem seal/valve spring seat should be pushed firmly and squarely over the valve guide using the valve stem as guide. Do Not Force seal
against top of guide. When installing the valve retainer locks, compress the spring only enough to install the locks.
CAUTION: Do not remove garter spring (2) around the seal at the top of the valve stem seal.
2. Install valve spring. See: Cylinder Head Assembly/Valve Spring/Service and Repair/Removal and Replacement/Valve Springs - Installation