Journey FWD V6-3.5L (2009)
5. Remove the nut (6) that secures the A/C liquid and suction line assembly (1) to the stud (2) located on the right front shock tower.
6. Remove the nut (5) that secures the A/C liquid and suction line assembly to the A/C expansion valve (4).
7. Disconnect the A/C liquid and suction line assembly from the A/C expansion valve, remove and discard the O-ring seals and position the
refrigerant lines out of the way.
8. Remove the two bolts (1) that secure the A/C expansion valve (2) to the evaporator tube tapping block (3).
9. Remove the A/C expansion valve from the tapping block and remove and discard the O-ring seals
10. Install plugs in, or tape over the opened refrigerant fittings and all expansion valve and evaporator tube ports.
Rear
REMOVAL
WARNING: Refer to the applicable warnings and cautions for this system before performing the following operation See: Service
Precautions/Warning and See: Service Precautions/Caution . Failure to follow these instructions may result in serious or fatal injury.
