Journey FWD V6-3.5L (2009)
12. Install the cowl screen. Install the push-pins (1) securing the cowl screen to the wheelhouse brace and cowl. Rotate the screw (2) in the center of
the cowl screen 90° counterclockwise to lock the screen in place.
13. Install the wiper arms. See: Wiper and Washer Systems/Wiper Arm/Service and Repair/Wiper Arm - Installation
14. Install the cowl top screen (3). Install the two push-pins (1) securing the cowl top screen at the ends. Install the remaining push-pins (2).
15. Install the engine appearance cover.
16. Connect the negative cable on the battery negative post.
17. Hook up the scan tool to initialize the ABM and perform the following:
a. Clear any faults.
b. Perform the ABS Verification Test and road test the vehicle. See: Powertrain Management/Computers and Control Systems/Testing and
Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests/ABS Verification Test
