Journey FWD V6-3.5L (2009)
Check Valve: Description and Operation
Washer Check Valve - Operation
OPERATION
Diaphragm-type washer system check valves provide more than one function. First, they prevent washer fluid from draining out of the washer supply
hoses back to the washer reservoir. This drain-back would result in a lengthy delay from when the washer system is activated until washer fluid was
dispensed through the washer nozzles because the washer pump would have to refill the washer plumbing from the reservoir to the nozzle. Such a
drain-back condition could also result in water, dirt, or other outside contaminants being drawn into the washer system through the washer nozzle orifice.
This water could subsequently freeze and plug the nozzle, while other contaminants could interfere with proper nozzle operation and cause improper
nozzle spray patterns. In addition, the check valve prevents washer fluid from siphoning out through the washer nozzle after the washer system is turned
OFF.
When the washer pump pressurizes and pumps washer fluid from the reservoir through the washer plumbing (5), the fluid pressure unseats a diaphragm
(3) from over a sump well within the valve by overriding the pressure applied to it by a piston (2) and coiled spring (1). With the diaphragm unseated,
washer fluid is allowed to flow toward the washer nozzle (4). When the washer pump stops operating, the spring pressure on the piston seats the
diaphragm over the sump well in the valve and fluid flow in either direction within the washer plumbing is prevented.
