Lancer Shelby L4-135 2.2L SOHC Turbo (1989)
Front Door Window Motor: Service and Repair
REMOVAL
Power Window Regulator Flex Track To Drive Arm
1.
Raise or the lower the window until the screw that attaches the flex track to the drive arm is in alignment with the access hole.
2.
Remove the flex track attaching screw from the drive arm.
3.
Manually move the window to the "full up" position and secure with a block under the window glass.
Flex Drive Window Regulator
4.
Remove the regulator attaching rivets by center punching the rivet and drilling the heads off with a 1/4 inch drill bit.
5.
Maneuver the motor end of the regulator through the access hole and rotate the regulator assembly out completely.
6.
Remove the screws that attach the motor to the regulator and remove the motor from the regulator track.
INSTALLATION