Lancer Shelby L4-135 2.2L SOHC Turbo (1989)
Headlight Switch: Service and Repair
Disable airbag, refer to Air Bags and Seat Belts/Air Bags (Supplemental Restraint Systems)/Service and Repair. After procedure has been
completed, rearm airbag system.
1. Disconnect battery ground cable.
2. Remove cluster bezel attaching screws, then the cluster bezel.
3. Remove headlight and accessory switch module attaching screws, then pull module assembly away from dash panel and disconnect all electrical
connectors.
4. Depress button on bottom of headlight switch, then remove switch knob and stem.
5. Remove switch assembly to switch module attaching screws.
6. Remove switch assembly from module, then switch assembly retaining plate from switch.
7. Reverse procedure to install.