dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Negative - Engine Compartment|Page 5158 > < Recall - Bulkhead Battery Cable Stud Torque Inspection|Page 5155
Page 1
background image

Battery Cable: Service and Repair
Negative - Engine Compartment

REMOVAL

1. Turn the ignition switch to the Off position. Be certain that all electrical accessories are turned off.
2. Remove the spare tire cover to gain access to the battery.
3. Disconnect and isolate the battery negative cable.
4. Remove the fastener securing the battery negative cable to the right front strut tower.

5. Raise vehicle on hoist.
6. Remove the fastener securing the battery negative cable to the transmission housing.

Negative - Engine Compartment|Page 5158 > < Recall - Bulkhead Battery Cable Stud Torque Inspection|Page 5155