Magnum V6-2.7L VIN T (2007)
4. Remove lower splash shield retaining bolts (1) and splash shield (2).
5. Remove engine mount nuts (1).
6. Remove engine mount studs (1) from the right engine mount isolator.
7. Place a block of wood under the oil pan (4) and raise engine with suitable jackstand.
8. Remove engine mount isolator to engine mount adapter bolts (1).
9. Remove engine mount isolator (2).
Installation
INSTALLATION
1. Install right engine mount isolator to engine mount adapter bolts (1). Tighten bolts to 75 Nm (55 ft. lbs.).