Magnum V6-2.7L VIN T (2007)
4. Remove oil filter (3).
5. Remove oil pan (4).
6. Remove oil pump pickup tube (2).
7. Remove windage tray/outer main bearing cap bolts (3).
8. Remove windage tray (1).
Installation
INSTALLATION
NOTE: Slots in windage tray should be on the right side of engine. If windage tray is improperly installed, damage to oil pan could result.
1. Install windage tray (1) torque mounting bolts to 27 Nm + 1/4 turn (20 Ft. Lbs. +1/4 turn).
2. Install oil pump pick up tube, torque mounting bolts to 28 Nm (250 In. Lbs.).