Magnum V6-3.5L VIN V (2006)
6. Install tire and wheel assembly (1). Tighten wheel mounting nuts (3) to 150 Nm (110 ft. lbs.) torque.
7. Lower vehicle.
8. Remove brake pedal holding tool.
9. Connect battery negative cable (2) to battery post. It is important that this is performed properly.
10. Bleed (1) base brake hydraulic system as necessary.
11. Road test vehicle making several stops to wear off any foreign material on brakes and to seat brake shoes.
Twin Piston Disc Brake Caliper
CALIPER - FRONT TWIN PISTON DISC BRAKE
REMOVAL
AWD