Magnum V6-3.5L VIN V (2006)
4. Remove wheel mounting nuts (3), then tire and wheel assembly (1).
5. Remove banjo bolt (6) connecting flexible brake hose (1) to caliper (5). There are two sealing washers (7) (one each side of hose fitting) that will
come off when bolt is removed. Discard these washers; install NEW washers on installation.
]
6. While holding guide pins from turning, remove caliper guide pin bolts (2).
7. Remove brake caliper (1) from brake adapter (3) and pads.
DISASSEMBLY
NOTE: Before disassembling the brake caliper, clean and inspect it.