Magnum V6-3.5L VIN V (2006)
1. Install unit (5), pushing mounting bracket down into mounting grommets (8) located in body of vehicle.
2. Connect 47-way wiring connector (5) at antilock brake module ABM (6).
3. Install brake tubes to rear (1 and 3) at hydraulic control unit. Tighten tube nuts to 20 Nm (177 inch lbs.) torque.
4. Install brake tubes (1, 2, 3 and 10) at hydraulic control unit (5). Tighten tube nuts to 20 Nm (177 inch lbs.) torque.
5. Remove brake pedal holding tool.