Magnum V6-3.5L VIN V (2006)
n.
Remove the differential extension (Figure 3).
o.
Separate the right axle shaft from the steering knuckle.
p.
Remove the right axle shaft from the vehicle.
q.
Remove the right tie rod end from the steering knuckle.
r.
Remove the right strut to lower control arm bolt and separate the strut from the arm.
s.
Apply a paint alignment mark to the propeller and front differential flange.
t.
Remove the four bolts holding the propeller shaft from the transfer case to the front differential assembly.
u.
Plug front differential openings to prevent fluid leakage.
v.
Remove front differential and secure it to the engine cradle away from the engine oil pan (Figure 4).
14.
Raise the vehicle.
15.
Remove the engine oil cooler/filter nipple and set oil cooler aside.
NOTE:
Do not remove the oil cooler coolant hoses from the engine oil cooler.