Magnum V6-3.5L VIN V (2006)
7. The arrow on top of piston must be pointing toward front of engine.
CAUTION: View of connecting rod oil squirt hole is from the front of the engine.
8. The oil squirt hole on connecting rod faces the major thrust (right) side of the cylinder bore.
9. Tap the piston down in cylinder bore, using a hammer handle. At the same time, guide connecting rod into position on connecting rod journal.
NOTE: Connecting rod bolts must be lubricated with clean engine oil.
10. Install the rod caps. Install cleaned and inspected connecting rod bolts and tighten to 27 Nm (20 ft. lbs.) Plus 1/4 turn.
11. Install the cylinder head(s).
12. Install the oil pan.