Magnum V6-3.5L VIN V (2006)
28.
Inspect the crankshaft journal and connecting rod bearing shell. A good bearing is shown in Figure 9. A failed bearing is shown in Figure 10. If
any of the following conditions are observed, continue with Section C LX Engine Replacement.
a.
Significant damage or wear to the connecting rod bearing from any of the following:
>
Galling
>
Embedded debris
>
Tab misalignment
>
Fine machining lines are not visible
>
Any bronze or copper coloration.
>
Fine burrs on the edge of the bearing oil hole.
NOTE:
For detailed color images of acceptable and failed bearings, view this CSN through TechCONNECT.