Magnum V6-3.5L VIN V (2006)
![background image](/dodge/magnum/v6-3.5l_vin_v/Page-563003.png)
manufacturers I.D. mark (dot) facing up, towards top of the piston.
4. Install No. 2 piston ring and then No. 1 piston ring.
5. Position piston ring end gaps as shown.
6. Position oil control ring expander gap at least 45° from the side rail gaps but not on the piston pin center or on the thrust direction. Staggering ring
gap is important for oil control.