Magnum V6-3.5L VIN V (2006)
Engine Mount: Service and Repair
Mount-Right
MOUNT - RIGHT
REMOVAL
1. Disconnect the negative battery cable.
2. Raise and support the vehicle.
3. Remove both of the engine mount to cradle nuts.
4. Remove both of the engine mount through studs.
5. Using a suitable jack stand and a block of wood positioned under the oil pan, raise the engine until the weight is off of the mounts (approximately
5 mm.).
6. Remove the right mount heat shield (2) bolts.
7. Remove the engine mount (2).
INSTALLATION