dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Engine Controls - MIL ON/DTC P0300 Set (Police Package)|Page 4084 > < Engine Controls - MIL ON/DTC's P0340/P0344 Set|Page 4079
Page 1
background image

PROM - Programmable Read Only Memory: Customer Interest
Engine Controls - MIL ON/DTC P0300 Set (Police Package)

NUMBER: 18-013-07

GROUP: Vehicle Performance

DATE: February 17, 2007

THE StarSCAN(R) FLASH FILES FOR THIS BULLETIN MUST BE RETRIEVED FROM THE INTERNET.

StarSCAN(R) SOFTWARE LEVEL MUST BE AT RELEASE 7.03 OR HIGHER FOR THIS BULLETIN.

SUBJECT:
Flash: MIL Illumination - DTC P0300 - Multiple Cylinder Misfire (Police Package)

OVERVIEW:
This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software.

MODELS:

2006

(LX)

300/Charger/Magnum

NOTE:

This bulletin applies to models equipped with a 3.5L Engine, W5A580 (NAGI) Automatic Transmission and Police Package (sales code EGG/DGJ
and AHB).

SYMPTOM/CONDITION:

The vehicle operator may experience MIL illumination with no other symptoms or conditions experienced. This condition may occur intermittently and
can be difficult to duplicate.

DIAGNOSIS:

Using a Scan Tool (StarSCAN(R)) with the appropriate Diagnostic Procedures available in TechCONNECT, verify all engine systems are functioning as
designed. If DIG's are present record them on the repair order and repair as necessary before proceeding further with this bulletin.

If the vehicle is brought in due to MIL illumination and DTC P0300 - Multiple Cylinder Misfire was recorded, perform the Repair Procedure.

PARTS REQUIRED:

SPECIAL TOOLS / EQUIPMENT REQUIRED:

REPAIR PROCEDURE - USING THE INTERNET TO RETRIEVE THE FLASH FILE:

NOTE:

When performing this Repair Procedure, the software release level in the StarSCAN(R); must be programmed with 7.03 level software or higher. The

Engine Controls - MIL ON/DTC P0300 Set (Police Package)|Page 4084 > < Engine Controls - MIL ON/DTC's P0340/P0344 Set|Page 4079