Magnum V6-3.5L VIN V (2006)
11. Remove nut (4) from end of upper ball joint stud (1)
12. Pull shock assembly (3) downward until studs clear shock tower (2), then pull it outward allowing access to upper control arm mounting bolts.
13. Export Only - If servicing right upper control arm, disconnect headlamp leveling sensor (2) link at upper control arm (1).
14. Remove upper control arm mounting (flag) bolts (1)
15. Remove upper control arm (2) from bracket (3) in shock tower (4).
INSTALLATION
NOTE: Although AWD and RWD upper control arms are similar in appearance, they are not interchangeable.