Magnum V6-3.5L VIN V (2006)
35. Snug set-screws (2) against Brace 9031-10. Do not overtighten set-screws as they will distort and bend bushing bore flange.
NOTE: Prior to using Press (1), Special Tool C-4212F, lubricate screw-drive threads to provide ease of use and promote tool longevity.
36. Assemble tools (See following list) over bushing as shown. Ensure Remover lies between ridges (3) on bushing to properly contact bushing can.
-
(1) Press C-4212F
-
(2) Remover 9031-5A
-
(4) Receiver 9031-8A
37. Tighten Press (1) screw-drive, pressing bushing out of crossmember.
38. Remove all tools.
INSTALLATION