Magnum V6-3.5L VIN V (2006)
Fluid Pressure Sensor/Switch: Service and Repair
42RLE Automatic Transmission
ASSEMBLY-TRANSMISSION SOLENOID/PRESSURE SWITCH
REMOVAL
NOTE: If the Solenoid/Pressure Switch Assembly is being replaced, the Quick Learn Procedure must be performed.
1. Raise vehicle on hoist.
2. Remove valve body assembly from transmission.
3. Remove Solenoid/Pressure Switch Assembly retaining screws (2) from solenoid.
4. Remove Solenoid/Pressure Switch Assembly (1) and screen from valve body (2).
INSTALLATION
NOTE: If the Solenoid/Pressure Switch assembly is being replaced, the Quick Learn Procedure must be performed.