Magnum V6-3.5L VIN V (2006)
3. Remove fill plug (1) to check and adjust rear axle fluid level. Top off axle with Mopar Gear and Axle Lubricant 75W-140. Reinstall fill plug
torque to 60 Nm (44 ft. lbs.) torque.
Seal-Pinion Flange
SEAL-PINION FLANGE
REMOVAL
1. Remove rear axle assembly from vehicle.
2. Measure axle assembly rotating torque and record measurement for reuse on assembly.
3. Using flange holder C-3281(1) and 41mm socket, remove pinion flange nut and discard.
