Magnum V6-3.5L VIN V (2006)
7. If rotating torque is low, increase pinion flange nut torque in 7 Nm (5 ft. lbs.) increments. Repeat until proper rotating torque is received.
8. Stake pinion flange nut (1) as shown.
9. Install rear axle assembly.
Seal - Axle Shaft
SEAL - AXLE SHAFT
REMOVAL
1. Remove halfshaft(s).
2. Using suitable screwdriver (1), remove axle shaft seal (2).
3. Visually inspect halfshaft seal journal for damage (excessive seal groove, nicks, scratches, etc. Replace halfshaft if necessary.