Magnum V6-3.5L VIN V (2006)
1. Remove three coupler-to-propeller shaft bolt/nuts.
2. Separate coupler (1) and damper (3) (if equipped) from propeller shaft. Note orientation and direction of components. It is imperative that they are
properly reinstalled.
INSTALLATION - FRONT
1. Install propeller shaft (1) into position.
2. Starting at transfer case end, align index marks placed upon removal and loose-install new propeller shaft-to-transfer case flange bolts.
3. Align index marks at front axle end of shaft, and loose-install new propeller shaft-to-front axle flange bolts.
4. Torque propeller shaft-to-transfer case and axle flange bolts (2) to 61 Nm (45 ft. lbs.).