Magnum V8-5.7L (2008)
Wheel Speed Sensor: Service and Repair
Rear Wheel Speed Sensor - Removal
REMOVAL
1. Raise and support vehicle. See: Maintenance/Vehicle Lifting/Service and Repair
NOTE: To release sensor connector from body wiring harness connector (1) in following step, move retaining clip (2) as indicated here, then
pull sensor connector (3) outward.
2. Remove sensor connectors (3 and 4) from body wiring harness connector (1) located in luggage compartment floor pan (2).
3. Separate left sensor connector (4) from right sensor connector (3).