Magnum V8-5.7L (2008)
7. Push in on cooler mounting clip tabs.
8. Remove cooler from clips mounted to cooling module.
Power Steering Fluid Cooler - SRT8/Police Package
FLUID COOLER - SRT8/POLICE PACKAGE
1. Disconnect and isolate battery negative cable (2) from battery post.
2. Siphon power steering fluid from pump reservoir.
3. Raise and support vehicle. See: Wheels and Tires/Vehicle Lifting/Service and Repair
4. Remove belly pan. See: Body and Frame/Exterior Moulding / Trim/Underbody Cover/Service and Repair/Belly Pan - Removal
5. Remove hose clamp (1), then return hose (5) from steering gear at cooler (2).
6. Remove hose clamp (4), then return hose (3) to reservoir at cooler (2).
