Magnum V8-5.7L VIN 2 (2007)
Pedal Positioning Switch: Service and Repair
Installation
INSTALLATION
1. Position switch (3) connector-side-down on the inside of the driver's seat cushion side trim.
2. Install two screws (1) fastening switch in place.
3. Connect wiring connector (2) to adjustable pedals switch (3).
4. Position side trim on driver's seat cushion left side and install three screws fastening side trim in place.
5. Install seat belt shield on driver's seat cushion left side trim.
6. Connect negative battery cable to battery post.
7. Check operation of adjustable pedals.
8. If vehicle is equipped with memory seats, the system will need to be initialized.