dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Towing / Trailer System > < Removal and Replacement|Page 10475
Page 6
background image

7.   If equipped with ESP, install the steering angle sensor and screw (3) located at the six o'clock position.

8.   Install the clockspring and screws (1) leaving one out so it will not unwind.
9.   Install the SCCM on the steering column and tighten the one clockspring screw (1) that was left loose.

Towing / Trailer System > < Removal and Replacement|Page 10475