Magnum V8-5.7L VIN 2 (2007)
Antenna Control Module: Service and Repair
Removal
REMOVAL
SEDAN
1. Disconnect and isolate the battery negative cable.
2. Remove C-pillar upper trim.
3. Disconnect wire harness connectors and antenna cable.
4. Remove mounting fasteners and antenna module.
WAGON
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected.
1. Disconnect and isolate the battery negative cable.
2. Remove the liftgate trim.
3. Disconnect wire harness connectors and antenna cable.
4. Remove mounting fasteners and antenna module.