Magnum V8-5.7L VIN 2 (2007)
Keyless Entry Module: Service and Repair
Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component
service. Failure to do so may result in accidental airbag deployment, personal injury or death.
2. Remove the instrument cluster bezel.
3. Remove the steering column opening cover.
4. Reach up behind the left side of the center stack and disconnect the ignition switch (6) and SKREEM (5) electrical connectors.
5. From underneath the ignition switch/lock assembly, loosen the lower retaining screw (2).
