Magnum V8-5.7L VIN 2 (2007)
Tire Pressure Monitor Receiver / Transponder: Service and Repair
Installation
Front
FRONT
1. Position transponder (2) against front fascia (4) and install mounting screw (3).
2. Connect wiring harness connector (1) at transponder (2).
3. Install wheelhouse splash shield and all components removed to access it.
4. Perform TPM Diagnostic Verification Test. See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic
Trouble Code Tests and Associated Procedures/Verification Tests
Rear
REAR
1. Position transponder (2) on body seam flange (4) and install mounting nuts (1).
2. Connect wiring harness connector (3) at transponder (2).
3. Install wheelhouse splash shield and all components removed to access it.
4. Perform TPM Diagnostic Verification Test. See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic
Trouble Code Tests and Associated Procedures/Verification Tests